Leader Evaporator Open House

And Customer Appreciation Days

April 27th & 28th, 2018 in Swanton, Vermont
8 to 4 both days!
Click here for a printable Schedule

We will have great Educational Seminars (same both days), plus many product demonstrations including:
Wood Fired and Oil Fired Evaporators running side by side
Large Display of Releasers running
Plus MORE!!!

Also don't forget to check out our Factory Seconds for a great deal. Most 2nds only have cosmetic damage.

Flood System Oil-Cooled Vacuum Pump - Electric

Flood System Oil-Cooled Vacuum Pump - Electric

View Larger Image

Email This Product to a Friend

These Rotary Vein vacuum pump systems are driven by belt and pulley from an electric motor and come with an oil reclaiming system to be installed on the exhaust of the vacuum pump. Unlike traditional drip oiling systems found on most rotary vein pumps the flood system injects a stream of oil into the housing to create additional lubrication, cooling, and higher vacuum.

Vacuum levels up to 25 inches
Reclaims 95% of the oil
No Heated Rooms or Constant Water Supply required
Designed for the intense 24 hour usage of today's maple syrup producer

Comes complete with a vacuum regulator, check valve, one season supply of oil, and oil filters.

Moisture trap, and vacuum gauges not included but highly recommended.

3/4 HP Electric Vacuum Pump

SKU:64370K

Designed for optimal use with 300-800 taps, maximum use of 1000 taps.

These small compact units come completely assembled with oil reclaiming system and moisture trap. Close coupled directly to the 3/4 HP electric motor. Motor is wired for 120V power, drawing 11 amps with a magnetic starter box installed. Vacuum pump is estimated to produce 8 cfm at 15 in Hg.

Special Order

1-1/2 HP Electric Vacuum Pump

SKU:64207K

Designed for optimal use with 800-1500 taps, maximum 1700 taps.

The 1-1/2 HP motor is set up for 220V, drawing approximately 9 amps. The belt driven vacuum pump is set up to run approximately 17 cfm at 15 in Hg.

Special Order

3 HP Electric Vacuum Pump

SKU:64210K

Designed for optimal use with 1500 - 2500 taps, maximum 3000 taps.

The 3 HP motor is set up for 220V, drawing approximately 16.5 amps. The belt driven vacuum pump is set up to run approximately 30 cfm at 15 in Hg.

Special Order

5 HP Electric Vacuum Pump

SKU:64211K

Designed for optimal use with 2500 - 5500 taps, maximum 6000 taps.

The 5 HP motor is set up for 220V, drawing approximately 21 amps. The belt driven vacuum pump is set up to run approximately 60 cfm at 15 in Hg.

Special Order

7-1/2 HP Electric Vacuum Pump

SKU:64214K

Designed for optimal use with 5500 - 7500 taps, maximum 8000 taps.

The 7-1/2 HP motor is set up for 220V, drawing approximately 30 amps. The belt driven vacuum pump is set up to run approximately 80 cfm at 15 in Hg.

Special Order

10 HP Electric Vacuum Pump

SKU:64215K

Designed for optimal use with 7000-9000 taps, maximum 10,000 taps.

The 10 HP motor is set up for 220V, drawing approximately 44 amps. The belt driven vacuum pump is set up to run approximately 105 cfm at 15 in Hg.

Special Order